S5443/S5443_S/S5443.srcs/sources_1/new/AdcInit/Power2ClkDivider.v

`timescale 1ns / 1ps
module Power2ClkDivider (
    clk_i,
    rst_i,
    valid_i,
    signal_o,
    rising_edge_o,
    falling_edge_o
);

//================================================================================
//
//  PARAMETER/LOCALPARAM
//
//================================================================================

    parameter   DIVISOR_POWER   = 2;

//================================================================================
//
//  PORTS
//
//================================================================================

    input           clk_i;
    input           rst_i;
    input           valid_i;
    output  reg     signal_o;
    output  reg     rising_edge_o;
    output  reg     falling_edge_o;

//================================================================================
//
//  REG/WIRE
//
//================================================================================

    wire    clk_div_flag;

//================================================================================
//
//  CODING
//
//================================================================================

//initial begin
//    if (DIVISOR_POWER < 1) begin
//        $error("parameter DIVISOR_POWER of module power2_clk_divider must be greater then 0");
//        $stop;
//    end
//end

generate
    if (DIVISOR_POWER < 2) begin
        assign  clk_div_flag    = 1'b1;
    end else begin
        reg     [DIVISOR_POWER-2:0] clk_div_cnt;
        always @(posedge clk_i or posedge rst_i) begin
            if (rst_i) begin
                clk_div_cnt <= {DIVISOR_POWER{1'b1}};
            end else if (valid_i) begin
                clk_div_cnt <= clk_div_cnt + 1;
            end else begin
                clk_div_cnt <= {DIVISOR_POWER{1'b1}};
            end
        end

        assign  clk_div_flag    = &clk_div_cnt;
    end
endgenerate

always @(posedge clk_i or posedge rst_i) begin
    if (rst_i) begin
        signal_o        <= 1'b0;
        rising_edge_o   <= 1'b0;
        falling_edge_o  <= 1'b0;
    end else if (valid_i) begin
        if (clk_div_flag) begin
            signal_o    <= ~signal_o;
        end
        rising_edge_o   <= ~signal_o & clk_div_flag;
        falling_edge_o  <= signal_o & clk_div_flag;
    end else begin
        signal_o        <= 1'b0;
        rising_edge_o   <= 1'b0;
        falling_edge_o  <= 1'b0;
    end
end

endmodule