Добавил пин FpgaAmCtrl для тестирования RfAm

src/constr/SbTmsg.cst

@@ -1,11 +1,10 @@
 //Copyright (C)2014-2024 Gowin Semiconductor Corporation.
 //All rights reserved. 
 //File Title: Physical Constraints file
-//Tool Version: V1.9.9.02
+//Tool Version: V1.9.9.03 (64-bit)
 //Part Number: GW1N-LV9PG256C6/I5
 //Device: GW1N-9
-//Device Version: C
-//Created Time: Thu 05 02 13:46:56 2024
+//Created Time: Tue 09 10 12:55:07 2024
 
 IO_LOC "DataMax2870MixRf2_o" C1;
 IO_PORT "DataMax2870MixRf2_o" IO_TYPE=LVCMOS33 PULL_MODE=UP DRIVE=8 BANK_VCCIO=3.3;
@@ -49,6 +48,8 @@ IO_LOC "ClkLmx94_o" G2;
 IO_PORT "ClkLmx94_o" IO_TYPE=LVCMOS33 PULL_MODE=UP DRIVE=8 BANK_VCCIO=3.3;
 IO_LOC "CsLmx94_o" F1;
 IO_PORT "CsLmx94_o" IO_TYPE=LVCMOS33 PULL_MODE=UP DRIVE=8 BANK_VCCIO=3.3;
+IO_LOC "FpgaAmCtrl_o" A15;
+IO_PORT "FpgaAmCtrl_o" IO_TYPE=LVCMOS33 PULL_MODE=UP DRIVE=8 BANK_VCCIO=3.3;
 IO_LOC "DdsSaw1Fpga_o" E1;
 IO_PORT "DdsSaw1Fpga_o" IO_TYPE=LVCMOS33 PULL_MODE=UP DRIVE=8 BANK_VCCIO=3.3;
 IO_LOC "GpioAdRfV2_o" C16;

src/src/Top/TopSbTmsg.v

@@ -72,6 +72,7 @@ module TopSbTmsg
 	output GpioAdRfV1_o,
 	output GpioAdRfV2_o,
 	output DdsSaw1Fpga_o,
+	output FpgaAmCtrl_o,
 
 	//Output SPI devices
 	output reg CsLmx94_o,
@@ -124,7 +125,7 @@ localparam [11:0] FIRMWARE_VER	= 12'h1;
 	wire spiDataVal;
 	wire spiDataValSync;
 	wire [WORDWIDTH-1:0] spiData;
-	wire [21:0] gpio1CtrlData;
+	wire [23:0] gpio1CtrlData;
 	
 	wire busyMosi1;
 	wire busyMosi4;
@@ -200,6 +201,7 @@ localparam [11:0] FIRMWARE_VER	= 12'h1;
 //================================================================================
 //  ASSIGNMENTS
 //================================================================================
+assign FpgaAmCtrl_o 		= gpio1CtrlData[22];
 assign DdsSaw1Fpga_o 		= gpio1CtrlData[21];
 assign GpioAdRfV2_o 		= gpio1CtrlData[20];
 assign GpioAdRfV1_o 		= gpio1CtrlData[19];